OpenBSDΒΆ

  1. Install the mitmproxy certificate on the test device

  2. Enable IP forwarding:

    >>> sudo sysctl -w net.inet.ip.forwarding=1
    
  3. Place the following two lines in /etc/pf.conf:

    mitm_if = "re2"
    pass in quick proto tcp from $mitm_if to port { 80, 443 } divert-to 127.0.0.1 port 8080
    

    These rules tell pf to divert all traffic from $mitm_if destined for port 80 or 443 to the local mitmproxy instance running on port 8080. You should replace $mitm_if value with the interface on which your test device will appear.

  4. Configure pf with the rules:

    >>> doas pfctl -f /etc/pf.conf
    
  5. And now enable it:

    >>> doas pfctl -e
    
  6. Fire up mitmproxy. You probably want a command like this:

    >>> mitmproxy -T --host
    

    The -T flag turns on transparent mode, and the --host argument tells mitmproxy to use the value of the Host header for URL display.

  7. Finally, configure your test device to use the host on which mitmproxy is running as the default gateway.

Note

Note that the divert-to rules in the pf.conf given above only apply to inbound traffic. This means that they will NOT redirect traffic coming from the box running pf itself. We can’t distinguish between an outbound connection from a non-mitmproxy app, and an outbound connection from mitmproxy itself - if you want to intercept your traffic, you should use an external host to run mitmproxy. Nonetheless, pf is flexible to cater for a range of creative possibilities, like intercepting traffic emanating from VMs. See the pf.conf man page for more.